1. 首页
  2. ›Nomura Initiates Coverage on Piotech With Buy, Bullish on China's Top Four Semiconductor Equipment Makers

Nomura Initiates Coverage on Piotech With Buy, Bullish on China's Top Four Semiconductor Equipment Makers

N
nashnova research
·今天发布·阅读约 10 分钟

Nomura initiates coverage on Piotech and resumes coverage on AMEC, ACM Research, and NAURA — all rated Buy, with Piotech ranked first. This means → Nomura is betting not on capacity expansion alone, but on the structural uplift equipment makers get from process upgrades plus domestic substitution.

01

How big is this market?

•
Nomura projects China's wafer-fab equipment market will grow from roughly $43.6 billion in 2025 to about $103.5 billion by 2030 — a ~19% CAGR.
•
Cumulative spending from 2026 to 2030: approximately $407.3 billion. In plain terms = five years of spending that exceeds the prior decade.
•
The base case assumes mainland China cannot obtain EUV lithography tools from 2026 through 2030. This means → the entire model is built on the strictest export-control scenario; the numbers are already conservative.
02

Without EUV, why does equipment demand actually rise?

•
Advanced nodes without EUV must rely on DUV multi-patterning — splitting one lithography step into multiple repeated passes — which multiplies etch, deposition, and cleaning steps.
•
Nomura's example: a 7 nm-class chip requires ~140 etch steps versus ~40 at 28 nm. Each additional 10,000 wafers-per-month of advanced capacity needs about 60 etch tools; a mature line needs roughly 25.
•
This reflects a key dynamic: the tighter the EUV restriction, the more process steps each wafer consumes — and equipment makers' value per wafer actually goes up.
03

How does the memory upgrade add another push?

•
3D NAND — flash memory that stacks storage cells vertically — directly raises equipment intensity as layer counts climb: etch tools' share of related capex rose from about 35% at 32 layers to roughly 48% at 128+ layers.
•
In DRAM, storage-capacitor fabrication demands high-aspect-ratio etching (cutting deep into extremely narrow holes) and atomic-layer deposition (ALD — a precision process that coats one atomic layer at a time). Etch and deposition together typically account for over half of a DRAM line's equipment capex.
•
This means → every generation upgrade at a memory fab ratchets up order density for equipment suppliers — exactly why Nomura weights memory-client exposure so heavily.
04

Why does Nomura favor Piotech and AMEC most?

•
Preference ranking: Piotech > AMEC > ACM Research > NAURA — the key criterion is exposure to memory customers.
•
YMTC and CXMT are the two main drivers of domestic memory expansion, and both are major clients of Piotech and AMEC. Piotech's PECVD business (plasma-enhanced chemical vapor deposition — depositing thin films on wafers using plasma) and AMEC's etch business are directly tied to memory process upgrades.
•
In plain terms = whoever sits closest to the memory upgrade cycle has the most visible order book — and that is precisely where Piotech and AMEC stand.
05

What risks should investors watch?

•
Nomura flags explicitly that some high-aspect-ratio etch and advanced ALD capabilities mentioned in the report are still in development or qualification — not yet in volume production.
•
This means → within the "domestic substitution" narrative, there is still a gap between R&D progress and mass-production delivery. Investors need to distinguish "entered R&D" from "entered the fab."
•
The entire model rests on the no-EUV assumption. If export controls ease, the equipment-demand structure could shift, and the logic behind the current ranking would need revisiting.

市场有风险,内容仅供研究参考,不构成投资建议。

相关标的

4
  • Piotech688072.SS+3.5%

    Nomura initiates coverage with a Buy rating and ranks Piotech as its top equipment pick; PECVD directly benefits from memory expansion and rising multi-patterning deposition demand.

  • Advanced Micro-Fabrication688012.SS+2.3%

    Nomura resumes coverage with a Buy rating and ranks AMEC as its second preference; etch equipment demand is most directly driven by increasing 3D NAND layer counts and additional multi-patterning steps.

  • NAURA Technology002371.SZ+4.1%

    Nomura resumes coverage with a Buy rating; as China's largest integrated semiconductor equipment platform, Naura benefits from wafer fab expansion and rising domestic substitution market share.

  • ACM ResearchACMR.US-8.2%

    Nomura resumes coverage with a Buy rating; cleaning equipment demand scales up with additional multi-patterning process steps, with YMTC and CXMT as key customers.